Impulsive power with both channels driven:
· 2 x 170W (8 Ohm)
· 2 x 320W (4 Ohm)
Continuous power with both channels driven
· 2 x 150W (8 Ohm)
· 2 x 200W (4 Ohm)
· XLR-F input sockets and Jacks for “link” connections
· Power outputs with Speakon connectors (min 4 Ohm)
· Power output in Bridge mode with Speakon connector (min 8 Ohm)
· 3-way switch to select operating mode: Parallel, Stereo or Bridge
· 3-way switch to select the Butterworth filter operating mode: By-Pass, High-Pass or Low-Pass
· Switch to select the high-pass cutoff frequency 35 Hz or 120 Hz
· Power supply protection with miniature circuit breaker
· Delayed output connection
· DC protection for speakers (relays)
· Short-circuit protection
· Operating mode indicator LEDs
· Fast Recovery Clipping function
· Frequency response 20Hz - 20kHz
· Dimensions (WxHxD) 482x88x410 mm
· Weight 13.2 kg
HP 600 - Specifications
|
Balanced Inputs |
|
Jack ј” XLR-F |
|
Impulsive power both channel driven |
W RMS |
2x170W rms @ 8 Ohm
2x320W rms @ 4 Ohm |
|
Impulsive power Bridge Mode |
W RMS |
640W rms @ 8 Ohm |
|
Continuous power both channel driven |
W RMS @ THD <0.05% 1 kHz |
2x150W rms @ 8 Ohm
2x200W rms @ 4 Ohm |
|
Continuous power Bridge Mode |
W RMS |
400W rms @ 8 Ohm |
|
Input sensitivity |
|
0.7 Veff |
|
Input impedance |
|
15K Ohm |
|
Slew rate |
|
>40V/uS |
|
Signal to noise ratio S/N |
|
>102 dB curva di pesatura „A“ |
|
Total harmonic distortion THD |
(1 kHz – 4Ohm) 1W full power |
<0.02% |
|
IMD |
1W full power |
<0.05% |
|
Frequency response |
@ +/- 0.2dB |
20Hz-20kHz |
|
Damping factor |
|
>150 @ 8 Ohm – 1kHz |
|
Maximum current output |
|
14 Aeff |
|
Maximum power consumption |
|
880VA |
|
Power supply voltage |
|
230 V |
|
Protections |
|
DC/Termica/SOA/Soft Start |
|
Cooling |
|
2 ventole a velocitа variabile |
|
Dimensions |
(LxAxP) mm |
482x88x410 |
|
Weight |
Kg |
13.2 |