QUBE Q 110
QUBE [Италия]
Two way full-range or bi-amp speaker system; 10” woofer - 1” driver
Compact but powerful bass reflex speaker employing a 10” neodymium loudspeaker. and 1” driver coupled to a 80°H x 50°V rotatable horn. The sound quality and the ratio of the performance to size were the main project criteria for the Q 110. The speaker is ideal for distributed sound reinforcement in night clubs, pubs, theatres. Thanks to its multi angle the cabinet can be used as monitor stage. Together with the Q 106,the Q110 this cabinet has been designed for visual discrete installation on all these applications. The enclosure tuning has been optimized to provide a maximum mid/high efficiency with sufficient low frequency extension. For more impact and for application that require more low frequency the use of complementary QUBE sub is suggested. The cabinet is constructed from 18 mm. Baltic birch wood has a durable and scratch resistant paint finish and it is provided with 6 M6 UHM attachments.
| Configuration (fullrange) |
Ways 2 |
| Recommended amplifier |
Watt (rms) 400 |
| Long term power |
Watt 200 |
| Short term power (IEC 268-5) |
Watt 800 |
| Nominal impedance |
ohm 8 |
| Configuration (bi-amp) |
Ways 2 |
| Recommended amplifier |
Watt (rms) 400/100 (LF/HF) |
| Long term power |
Watt 200/50 (LF/HF) |
| Short term power (IEC 268-5) |
Watt 800/200 (LF/HF) |
| Nominal impedance |
ohm 8/8 (LF/HF) |
| Frequency response @ -6dB |
60Hz - 18KHz |
| Low frequency woofer |
inch 10 – 2,5 coil |
| High frequency driver |
inch 1 - 1.7 coil |
| Sensitivity /fullrange |
(@1W/1m)dB 96,5 |
| Sensitivity/ bi-amp |
(@1W/1m)dB 96,5/106 (LF/HF) |
| Maximum SPL (fullrange) |
dB 122,5 |
| Maximum SPL (bi-amp) |
dB 122,5/128,5 (LF/HF) |
| Dispersion (rotatable) |
H x V 80° x 50° |
| Crossover frequency |
KHz 1,8 |
| Recommended HP filter |
45Hz-24dboct |
| Recommended external |
controller SP 22 D |
| Input connectors |
2 speakon |
| Net dimensions (WxHxD) |
cm 33,8x59x31,3 |
| Net weight |
Kg 17 |