QUBE QM 115
QUBE [Италия]
Two way monitor speaker system; 15” woofer - 2” coax driver
The QM 115 is a full range loudspeaker with a built in passive filter that, as in all Qube passive speakers, can be switched into two ways bi amp cabinet. The coaxial titanium 2” driver and the 15” LF speaker use separated magnets. The coax driving system is quite close to one point source; this configuration creates a very compact drive assemble that allows to use a compact low profile cabinet. The result is a monitor with a vocal presence and clarity, balanced sound and feedback stability. The QM 115M is capable of high sound pressure. The monitor is made from 18 mm. Baltic birch wood has and scratch resistant paint finishing. The shape of the cabinet allows to assemble the speaker in different arrays as drum fill coupled with QS 118 or QS 115 subwoofers or side fill coupling two cabinets. The front of the monitor is protected by a metal grill. The QM 115 is equipped with 5 M10 UHM attachment points.
| Configuration (Full range) |
Way 2 coax |
| Recommended amplifier |
Watt (rms) 700 |
| Long term power |
W 350 |
| Short term power(IEC268-5) |
W 1400 |
| Nominal impedance |
ohm 8 |
| Configuration |
(Bi amp) Way 2 |
| Recommended amplifier |
Watt (rms) 700/160 (LF/HF) |
| Long term power |
W 350/80 (LF/HF) |
| Short term power(IEC268-5) |
W 1400/320 (LF/HF) |
| Nominal impedance |
ohm 8/8 (LF/HF) |
| Frequency response @ -6dB |
60Hz – 18KHz |
| High frequency driver |
inch 2 – 3 coil |
| Low frequency woofer |
inch 15 – 3 coil |
| Sensitivity (Full range) (@1W/1m) |
dB 99 |
| Sensitivity (Bi amp) (@1W/1m) |
dB 99/108 (LF/HF) |
| Maximum SPL (Full range) |
dB 130 |
| Maximum SPL (Bi amp) |
dB 103/133 (LF/HF) |
| Crossover frequency |
KHz 1,6 |
| Dispersion |
70° conical |
| Recommended HP filter |
45Hz-24dboct |
| Recommended external controller |
SP 22 D |
| Input connectors |
2 speakon |
| Net dimensions (WxHxD) |
cm 53,7x38,7x59,8 |
| Net weight |
Kg 27 |