QUBE SP 26 D
QUBE [Италия]
Digital controller
The SP 26 features 2 inputs and 6 outputs, each output feature crossover filters, 5 band parametric equaliser configurable as high and low shelving filters plus limiter and delay. Full metering is provided for inputs and outputs, with mute and access buttons allowing quick set up and gain adjustment. Features - 2 Inputs and 6 outputs provide for multiple crossover formats including full stereo 3 way. - 6 x 5 band parametric sections, plus high and low shelving filters for box equalisation. - High performance limiters on each output. - Precise 2.6 mS (less than 1mm) delay increment for perfect driver time alignment. - 80 non-volatile preset memories. - 19 User memories - Full and individual parameter locking. - Delay linking option allows speaker box alignment while keeping driver alignment. - Mono sub mix is provided. - Excellent sound quality - RS232 interfaces, provided as standard, allow connection to PC enabling quick and easy updates of software and presets. - Accommodates mains voltages from 70V to 260V without adjustment. - AES/EBU option is available. - Preset Manager Software allows easy preset definition.
| SPECIFICATIONS |
|
| Inputs |
Two electronically balanced. u |
| Impedance |
> 10k ohms |
| CMRR |
>65dB 50Hz - 10kHz |
| Outputs |
Six electronically balanced. u |
| Source Imp |
< 60ohms |
| Min. Load |
600ohm |
| Max. Level |
+20dBm into 600 ohm load |
| Frequency Resp. |
±0.5dB 20Hz - 20kHz |
| Dynamic Range |
>110dB 20Hz -20kHz. Unwtd |
| Distortion |
< 0.02% @ 1kHz, +18dBm |
| Maximum Delay |
650 mS. (Increment 2.6 μS) |
| Output gain |
adjustable +15dB to -40dB in 0.1dB steps and mute |
| Input gain |
adjustable +6dB to -40dB in 0.1dB steps |
| Parametric Equalisation |
|
| Filters |
5 Sections per output |
| Filter gain |
+15dB to -30dB in 0.1dB steps |
| Centre frequency |
20Hz - 20kHz, 1/36 octave steps. (368 positions) |
| Filter Q / BW |
0.4 to 128 / 2.5 to 0.008 |
| Sections switched to shelving response |
|
| Low frequency |
20Hz - 1kHz |
| High frequency |
1kHz - 20kHz |
| Shelf gains |
±15dB in 0.1dB steps |
| High and Lowpass Filters |
|
| Filters |
1 of each per output |
| Frequency (HPF) |
10Hz - 16kHz, 1/36 octave steps |
| Frequency (LPF) |
35Hz - 22kHz, 1/36 octave steps |
| Response |
Bessel / Butterworth 12/18/24dB per octave and Linkwitz-Riley 24dB per octave |
| Limiters |
|
| Threshold |
+22dBu to -10dBu |
| Attack time |
0.3 to 90 milliseconds |
| Release time |
2, 4, 8, 16 or 32 times the attack time |
| Display |
2 x 20 character backlit LCD |
| Input meter |
2 x 3 point, -24dB to digital clip |
| Output meter |
6 x 3 point, -24dB to +1dB into limit |
| Connectors |
|
| Inputs |
3 pin female XLR |
| Outputs |
3 pin male XLR |
| RS232 |
9 pin DEE connector |
| Power |
3 pin IEC. |
| Power |
60 to 250V ±15% @ 50/60Hz |
| Consumption |
< 20 watts |
| Weight |
3.5kg. Net (4.8kg. Shipping) |
| Size |
1.75"(1U) * 19" * 11.8" (44 * 482 * 300mm) excluding connectors |
| Options |
u = Transformers available |