Impulsive power with both channels driven:
· 2 x 600W (8 Ohm)
· 2 x 1000W (4 Ohm)
· 2 x 1500W (2 Ohm).
Continuous power with both channels driven:
· 2 x 550W (8 Ohm)
· 2 x 900W (4 Ohm)
· 2 x 1300W (2 Ohm)
· XLR signal inputs and outputs
· Electronically balanced inputs
· 4-way Speakon power outputs and binding posts
· Option of parallel, mono and stereo operation
· Power supply protection with miniature circuit breaker
· Independent protection on each channel
· Soft start
· Delayed output connection
· Double DC protection for speakers (relays)
· Output short-circuit protection
· SOA protection
· Clipping limiter
· 8 bi-colour LEDs indicating all operating modes
· Ground lift switch
· Signal/noise ratio S/N under 110 dB weighting curve “A”
· Frequency response 20Hz - 20kHz
· Dimensions (WxHxD) 482x88x460 mm
· Weight 24 kg
Symbol 12000 - Specifications
|
Balanced Inputs |
|
XLR-F |
|
Impulsive power both channel driven |
W RMS |
2x600W rms @ 8 Ohm
2x1000W rms @ 4 Ohm
2x1500W rms @ 2 Ohm |
|
Impulsive power Bridge Mode |
W RMS |
2000W rms @ 8 Ohm
3000W rms @ 4 Ohm |
|
Continuous power both channel driven |
W RMS @ THD <0.05% 1 kHz |
2x550W rms @ 8 Ohm
2x900W rms @ 4 Ohm
2x1300W rms @ 2 Ohm |
|
Continuous power Bridge Mode |
W RMS |
1800W rms @ 8 Ohm
2600W rms @ 4 Ohm |
|
Input sensitivity |
|
1.7 Veff |
|
Input impedance |
|
15K Ohm |
|
Slew rate |
|
>40V/uS |
|
Signal to noise ratio S/N |
|
>110 dB curva di pesatura „A“ |
|
Total harmonic distortion THD |
(1 kHz – 4Ohm) 1W full power |
<0.02% |
|
IMD |
1W full power |
<0.05% |
|
Frequency response |
@ +/- 0.2dB |
20Hz-20kHz |
|
Damping factor |
|
>250 @ 8 Ohm – 1kHz |
|
Maximum current output |
|
80 Aeff |
|
Maximum power consumption |
|
2700VA |
|
Power supply voltage |
|
230 V |
|
Protections |
|
DC/Termica/SOA/Soft Start |
|
Cooling |
|
2 ventole a velocitа variabile |
|
Dimensions |
(LxAxP) mm |
482x88x460 |
|
Weight |
Kg |
24 |